Deathloop Pc Requirement: Can You Play Deathloop on Your Computer?

Deathloop PC Requirement: Deathloop is a strong contender for game of the year, but it all depends on the platform you’re playing on. PS5 players are enjoying the time-looping game set in the 1960s, while those with a PC have been left in the cold due to poor optimization.

It’s true that the game was designed for consoles, but that doesn’t mean PC gamers can’t have fun with it. Anyone using the specified gear for Deathloop on PC can achieve performance on par with or better than the PS5.

When playing on a PC, you’ll have a lot more control over the visual settings than you would on a console, however, some will have a bigger effect on performance than others. For the tests, I utilised the computer at home, which is equipped with a Ryzen 5 3600 CPU operating at its default rates and a Radeon RX 5700 graphics card.

While the former is marginally superior to the Ryzen 7 2700x listed by the developer, the latter is what Arkane recommends as the optimal GPU for Deathloop. Even so, I coaxed respectable frame rates out of my system, which was on par with those PS5 users was reporting.

Deathloop PC Requirement

All players should carefully consider the following tiers of PC specifications for Deathloop. The game will run better on an RTX 3080, but if your PC isn’t up to snuff, you might want to hold off on buying one.

Similarly, we advise playing Deathloop from an NVMe solid-state drive if you truly want to replicate what PS5 players are experiencing. Your best bet is to get one that conforms to PCIe Gen4, the same specification used in the PS5 and Xbox Series X/S. However, if you’re looking for something a little more modern than a traditional mechanical hard drive, a PCIe Gen3 NVMe SSD will suffice.

Deathloop System Requirements (Minimum)

  • CPU: Intel Core i5-8400 @ 2.80GHz or AMD Ryzen 5 1600
  • RAM: 12 GB
  • OS: 64-bit Windows 10 version 1909 or higher
  • VIDEO CARD: Nvidia GeForce GTX 1060 (6GB) or AMD Radeon RX 580 (8GB)
  • PIXEL SHADER: 5.1
  • VERTEX SHADER: 5.1
  • FREE DISK SPACE: 30 GB
  • DEDICATED VIDEO RAM: 6 GB (8GB AMD)

Deathloop System Requirements (Recommended)

  • CPU: Intel Core i7-9700K @ 3.60GHz or AMD Ryzen 7 2700X
  • RAM: 16 GB
  • OS: 64-bit Windows 10 version 1909 or higher
  • VIDEO CARD: Nvidia GeForce RTX 2060 (6GB) or AMD Radeon RX 5700 (8GB)
  • PIXEL SHADER: 5.1
  • VERTEX SHADER: 5.1
  • FREE DISK SPACE: 30 GB
  • DEDICATED VIDEO RAM: 8192 MB

How does Deathloop Perform?

I’m going to skip the obvious and tell you that Deathloop’s frame rate cap was reached on the suggested specifications at the lowest quality presets. It wasn’t until the medium setting was activated, though, that framerate drops became noticeable.

Using the default configuration, Deathloop’s medium preset achieved a framerate of about 60–80 fps. At least 70 frames per second were achieved while roaming one of the game’s major zones after enabling AMD’s Fidelity FX Super Resolution in the game’s settings, a simple upscaling process.

When talking about Deathloop, it’s impossible to avoid mentioning the obvious. While we didn’t encounter the reported decreases to single-digit FPS, we did encounter regular hitching in the game due to spikes in frame time, so it’s clear that the PC version isn’t perfect.

It’s not a hardware problem, so there’s nothing you can do about it, but it’s important to remember that the problem manifests itself differently on different people’s computers. Arkane is looking into this right now, but it’s unclear when they’ll find a solution.

What are the best settings for Deathloop?

However, after fiddling with the game’s settings for a while, it became apparent that players can drop some settings for a few additional frames here and there if they are ready to make some sacrifices.

Turn off the motion blur

Truth be told, the initial proposal is more of a favour than a compromise. Deathloop’s motion blur is not only unpleasant to look at, but it also increases the workload on your graphics processing unit (GPU). Leave motion blur off unless you’re running the game at less than 30 frames per second and wish to smooth it out.

Lower water quality

This may seem like an odd choice at first, but after playing Deathloop for about 10 hours, you’ll realise how little time is spent really looking at the ocean. If your game’s frame rate is stuttering, you may be able to get a noticeable boost by lowering the water quality settings from high to medium, for example.

Turn texture quality down

PC gamers place a high value on texture quality, but in this situation, it’s understandable if you’d rather not have it. While the game looks its best with texture quality set to high or ultra, even lowering it to medium won’t significantly diminish the game’s polished visuals and will result in a welcome increase in frame rate.

Basically, once you’ve set the game’s texture settings to medium, you should avoid staring into distant mountains or panoramas. At that point, the peaks of the mountains resemble puddles of melting chocolate ice cream.

Forget about shadow quality

There’s something a little off about how Deathloop handles shadow quality; the higher it is set, the further away shadows are rendered at a greater resolution, which seems counterintuitive.

The quality of the shadows that are closest to you (i.e., the ones you’ll notice the most) is acceptable even at the lowest settings. For an instant boost in frame rate, reduce shadow quality to its lowest setting.